STRUCTURE CUBE / VIDEO 01 / V3.0.4
Your first prefabricated support report
Follow Xiaoan from layout and pipe loads to result checks and a teaching report.
The video could not be played. Try again later, or open the original video。
Press play · Pause, seek or go full screen
LESSON OVERVIEW
Lesson overview
Follow a five-level prefabricated support teaching project, starting at the overall support calculation entry on the home screen. Set uprights, cross-members, support spacing, materials and connection conditions, then add duct, cable-tray and water-pipe loads by level. Check that load positions correspond to the intended cross-member levels.
Commit the inputs and recalculate. Review member, connection and deformation results rather than only the overall pass status. Finally, enter project details, select PDF output and open the report to compare the model, loads and results. The lesson has Chinese audio. Its dimensions and values are teaching examples; real projects need verified conditions and professional review.
BEFORE YOU START
Prepare, then follow.
Open Structure Cube and create a separate practice project. Dimensions and loads in the lesson are teaching examples; use verified conditions for real work.
Companion written steps →CHECK AS YOU GO
Turn watching into checked practice.
- Commit edited inputs and recalculate before reading the results.
- Review members, connections and deformation rather than one pass label.
- Match project details, model and the exported file.
Original teaching footage retains the recorded interface and actions. Export formats and watermarks depend on edition and project rights. Example values are not safety conclusions for a real project.