1:56INTRODUCTION 00
Meet Structure Cube.
A 116-second introduction to support modelling, CAD/Revit collaboration and report delivery.
New to Structure CubeOpen lesson →STRUCTURE CUBE / WORK GUIDE / V3.0.4
Learning centre
Follow a video, check the written steps. From your first report to everyday tasks.
Follow → Verify → Repeat independentlyDownloads and tutorials are now together →
WATCH / FOLLOW / CHECK
Start with a short lesson.
3 videos · Introduction to practice · Revisit any time
Get acquainted
See the workflow before you begin.
1:56Practise with Xiaoan
Follow once, then make the workflow your own.
2:53PRACTICAL 01
Your first prefabricated support report
Follow Xiaoan from layout and pipe loads to result checks and a teaching report.
First-time users · Follow one complete workflowOpen lesson →
2:50PRACTICAL 02
A welded support report for a data-centre example
Practise a welded support workflow and trace failing checks in a data-centre teaching scenario.
After lesson 01 · Practise welded supportsOpen lesson →No matching lesson. Try another term.
Videos have Chinese audio and interface text. Written task guides below are available in English.
Find the written steps
Light and DarkOne minute · Switching and local preferencesYour first deliverableTask lesson · Start hereLoad partial factorsSettings, adoption and reviewMaterial recipes & quantitiesTask lesson · 3.4 m / 4 washers / 3.6 mPrefabricated modelling & section comparisonLayout, input, recalculationWelded members & connectionsMembers, welds, fixingsFill and export a reportFields, languages, export rightsReview before deliveryMatch inputs with deliverablesCheck bilingual outputLanguages and field boundariesOrganise a team evaluationConditions, records, acceptance
No matching task. Try another term or describe the symptom to Xiaoan.
Where are you stuck?
Existing loads did not change
Saved defaults govern subsequent new loads. Distinguish new, copied and historical records, then compare design and characteristic values.
Open the relevant task →Bill quantities differ
Check calculation unit and physical counts, then usage per body; regenerate after edits.
Open the relevant task →Quantity exists but mass is blank
Blank is not zero. Keep the quantity and check the mass source; known mass is not a complete total.
Open the relevant task →Results or reports seem outdated
Commit edits and recalculate; verify calculation unit and output time before judging a change.
Open the relevant task →CAD / Revit transfer is blocked
Record host version, entry point and exact message. Full CAD lessons remain in the desktop guide; ask Xiaoan with a redacted screenshot if needed.
Open the relevant task →